|
Hướng dẫn mua, sử dụng máy bơm công nghiệp, bơm cứu hỏa, bơm xăng dầu |
Hướng dẫn lựa chọn hệ thống định lượng xăng dầu, cần xuất dầu |
Tư vấn lựa chọn, sử dụng đồng hồ đo lưu lượng, lưu lượng kế đo nước, đo xăng dầu và đo chất lỏng |
Hướng dẫn lựa chọn Barrier tự động, bãi đỗ xe tự động |
Tư vấn, thiết kế hệ thống chữa cháy, hệ thống báo cháy tựu động, hệ thống sprinkler tự động TCVN |
Bí quyết thông thạo các điều kiện Incoterm 2010 trong thương mại quốc tế |
|
|
|
Khách trực tuyến: 22 |
Lượt truy cập: 2285 |
|
|
|
Coriolis flow meter - Mass flow meter
|
Coriolis flow meter - Mass flow meter |
|
|
MÔ TẢ |
Coriolis flow meter: Two parallel flow tubes inside the coriolis meter vibrate at their resonant frequency in opposite directions. Any mass flow passing through the tubes delays the vibration at the incoming side and accelerates the vibration at the outgoing side. This causes a small time delay between both ends of the tube. This time delay is measured and is used to calculate the mass flow through the tubes.
By measuring the resonant frequency of the tubes the mass of the medium and - given a constant volume inside the tubes - the density of the medium can be calculated. As both effects are temperature dependent, the temperature is measured via a precise sensor for correcting the temperature effects of flow and density measurement.
As a consequence mass flow, density and temperature of the medium are directly measured. As the mass flow and the specific gravity are known the volume flow can be calculated.
Coriolis meter size : DN4 to DN1000
Capacity flow : 0 - 5000 tons/hr
* offering the most accurate and repeatable mass measurement for liquids, gases, or slurries.
* Industry standard for custody transfer and critical process control
* Best two-phase flow capability for batching, loading, and entrained gas applications
* Highest immunity to fluid, process, or environmental effects for superb measurement confidence
* Specialty meters designed for high-temperature, high-pressure and corrosive applications
Available in numerous materials of construction including Super Duplex, ideal for chloride corrosion and pressures up to ANSI CL900 (2320 psi)
|
|
|
|
Hotline:
0989.886.889 |
Bán hàng Online (Mr Tuân) |
Bán hàng Online (Ms Xuân) |
Bán hàng Online (Mr Tú) |
Bán hàng Online (Ms Thủy) |
Bán hàng Online (Mr Huy) |
Chăm sóc khách hàng (After Sales) |
Admin: tu.hm@vietnam-pump.com |
|
|
|